To Next PageTo Next PageWhat to do if Loctite Controller product doesn't cure completely?
If the Loctite Controller's system functions appear to be operating, but the product does not cure completely, or the power is low, it may be due to an accumulation of product or other contaminants on the lens of the CureJetTM. Clean the lens with a soft cloth and isopropyl alcohol.
How to fix Loctite Single CureJet Controller when no light is irradiated?
If no light is irradiated from the Loctite Controller when the Start button is depressed, plug the CureJetTM into the LED Controller and allow the unit to cool.
General| Brand | Loctite |
|---|---|
| Model | Single CureJet |
| Category | Controller |
| Language | English |
Lists all components included with the Loctite CureJet system.
Provides critical safety instructions and warnings for safe operation.
Explains the fundamental working principles of the Loctite CureJet LED System.
Details the unit's controls, indicators, and connection ports.
Details the spectral output and typical output of the LED.
Instructions for setting up and mounting the LED controller and CureJet.
Step-by-step guide for operating the Loctite CureJet LED System.
Procedure for verifying the system's light output using a radiometer.
Lists common issues, their causes, and recommended corrections.
