EasyManua.ls Logo

Loctite Single CureJet - 3. TECHNICAL DATA; 3.1 Energy Requirements; 3.4 UV Output Characteristics

Loctite Single CureJet
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Technical Data
3.1 Energy Requirements
Input Power: 85-264 VAC, 50-60 Hz
Power Draw: 150 Watts
Inrush Current: 3 Amps
3.2 Dimensions (LED Controller)
Width: 10 inches
Depth: 9 5/8 inches
Height: 3 7/8 inches
Weight: 8 lbs
3.3 Dimensions (CureJet
TM
)
Width: 1 inch
Depth: 10 1/8 inches
Height: 2 1/2 inches
Weight: 1 lb
3.4 UV Output Characteristics 375 Units(UV) 405 Units Indigo
TM
Units
Typical Output *: >4 W/cm
2
> 4W/cm
2
>4 W/cm
2
Spectral Output Range: 375-380 nm 390 – 420 nm Proprietary
Primary Peak: 375 nm 405 nm Proprietary
3.5 Operating Conditions
Max Operating Environment Temperature Approx 90
o
F (55
o
C)
Max Operating Environment Humidity 85% RH
(*Exact output measurement is dependent on the brand and calibration method of the meter used.
These measurements were made with the Loctite
®
UV-B&A LED Qualified Radiometer P/N 1390323
(375 Units) and Visible Light LED Dosimeter, P/N 1265282 (405 Units & Indigo
TM
Units).

Related product manuals