Do you have a question about the Loewe klang m1 and is the answer not in the manual?
Number of speakers | 1 |
---|---|
Audio output channels | - channels |
Number of passive radiators | 2 |
Recommended usage | Universal |
Built-in microphone | Yes |
Card reader integrated | - |
Frequency range | 96 - 20000 Hz |
RMS rated power | 16 W |
Signal-to-Noise Ratio (SNR) | 88 dB |
Wi-Fi | No |
Bluetooth range | 10 m |
Bluetooth version | 4.2 |
Bluetooth profiles | A2DP, AVRCP, HFP |
Connectivity technology | Wireless |
Battery type | Built-in battery |
Battery capacity | 1850 mAh |
Power source type | Battery |
Battery life (max) | 12 h |
Battery recharge time | 2 h |
Product type | Stereo portable speaker |
Product color | Gray |
Product design | Rectangle |
Volume control | Buttons |
Housing material | Stainless steel |
Cables included | Micro-USB, USB |
Quantity per pack | 1 pc(s) |
Depth | 23 mm |
---|---|
Width | 133 mm |
Height | 63 mm |
Weight | 325 g |
Thank you for choosing Loewe. Loewe stands for high standards in technology, design, and ease of operation.
The set is intended exclusively for audio playback via Bluetooth or audio IN.
Use only a 5V/1A USB adaptor. Protect from surges caused by lightning.
Place on a stable surface, away from heat and direct sunlight.
Ensure adequate space around the set for air circulation.
Avoid loud music to prevent hearing damage and permanent loudspeaker strain.
Observe traffic regulations and vehicle instructions when using the device.
Do not let unsupervised children handle the set; do not play unattended.
Disconnect before cleaning. Use a damp, soft cloth; avoid harsh cleaning agents.
Displays charging status, volume, and device status like power, audio IN, Bluetooth, and calls.
Includes power, volume (+/-), and play/pause buttons for device operation.
Features Micro USB for charging and Audio IN (3.5mm jack) for wired connections.
Use a 5V/1A USB supply. Charge for 2 hours before first use. Battery life is approx. 12 hours.
Press the power button for over 1 second. The LED display will light up.
Press the power button for over 1 second to enter standby mode. The LED display turns off.
Couple wirelessly via Bluetooth. Press and hold play/pause button, search on audio source, select device.
Connect analogue stereo output from audio source using a 3.5mm jack cable to Audio IN.
Use play/pause, next/previous track buttons. Playback priority: cable, hands-free, Bluetooth.
Adjust volume using +/- buttons. Mute function available; volume shown on LEDs.
Accept/end calls with buttons. Adjust volume. Ensure quiet environment for clarity.
Connect two Loewe klang m1 units for synchronized playback; one acts as 'Master', the other as 'Slave'.
Rechargeable batteries are consumables and not covered by warranty. Do not replace defective batteries.
Do not dispose of product or batteries in household waste. Return to designated locations.
Details item number, temperature, humidity, dimensions, weight, and performance.
Lists Bluetooth profile, range, battery life, charging time, and connections.