Loewe klang m1 - Advanced Functions; Hands-Free Function; Jam Mode Operation

Loewe klang m1
User handbook
9
english
n
Hands-free function
Jam mode
Hands-free function
The Loewe klang m1 must be switched on and be coupled
and connected via Bluetooth (Page 7) with your mobile
telephone.
On an incoming call, a ring tone sounds The LED display
6
(play) and
3
(power) blink. In the case of a running audio
playback, this is paused.
Accept the incoming call by pressing the button
5
on the
Loewe klang m1 or the corresponding button on your mobile
telephone.
The LED display
6
(play) and
3
(power) lights.
Set the sound volume on the Loewe klang m1 with the buttons
+/-
4
(see also Page 8).
End the call by pressing on the button
2
on the Loewe klang
m1 or the corresponding button on your mobile telephone.
Loud ambient noise interferes with the quality of the hands-
free function. Ensure a quiet environment or do not use the
hands-free function if the environment is not suitable.
In order to achieve good speech intelligibility between the
call partners, talk only alternately if possible. The distance
between the speaker and Loewe klang m1 should be be-
tween 0.3 m and 1.2 m.
Jam mode
With the jam mode, it is possible for you to connect two Loewe klang m1 to each
other. The playback is now synchronized via both Loewe klang m1.
A Loewe klang m1 functions hereby as “Master” and a Loewe klang m1 as
“Slave”.
To connect the two loudspeakers with each other, press at
the same time on both Loewe klang m1 the button
5
(play)
> 1 sec..
Press on one of the pair of Loewe klang m1 the button
5
(play)
to select this one as “Master“.
Couple via Bluetooth (Page 7) the previously selected
“Master”- klang m1 with your mobile telephone.
The audio playback in the jam mode, behaves the same as the
normal audio playback (Page 8).
End the jam mode by pressing on the button
2
(power) on
the Loewe klang 1.