Page 11 / 11
Buttons do not work (display works)
Possible Cause Solution
Cable is defect Contact our customer service
Handswitch is defect
Contact our customer service / change the
handswitch
Handswitch does not work (neither display nor buttons)
Possible Cause Solution
Cable is not plugged
Cable is not plugged as intended
Plug the plug in the intended jack marked
with .
Bad pin contact
Plug off the plug an plug it in as intended ( as
described above)
Cable is defect Contact our customer service
7. Further Information
7.1 End of life disposal
Please heed following disposal instructions when disposing of the HSU-cable-
handswitch:
Note: Dispose of the components ecologically sound (separate plastic
from electronics parts)!
To Previous Page
Loading...
Need help?
General
