LOGICDATA HSU User Manual

Page 9 / 11
4.3 Advanced Functions
4.3.1 Storing a position
Using this function you are able to store a desktop position.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1.
Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the S button.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4.
Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
4.3.2 Recalling a saved position
Using this function you are able to recall a stored position.
A
lternative A (manually)
1.
Press and hold the desired position button (e.g. 2).
The desk moves until the saved position is reached.
If you release the button before reaching the saved position, the desk
stops and the saved position will not be reached.
2.
The desk has reached the saved height. Release the position button
The display reads the actual desk-height.

LOGICDATA HSU Specifications

General

Brand	LOGICDATA
Model	HSU
Category	Indoor Furnishing
Language	English