Page 3 / 11
1. Preface
Dear customer,
Thank you for choosing a HSU – cable-handswitch by LOGICDATA Electronic &
Software Entwicklungs GmbH. You have purchased a state-of-the-art product.
2. General
2.1 Intended Use
The HSU cable-handswitch must be used with LOGICDATA control boxes. The
control box must be installed, initially operated and functional tested by competent
personnel only. Use other than described above is only allowed with permission of
LOGICDATA.
Information: For all information concerning LOGICDATA control boxes
please refer to the corresponding manual.
2.2 Definition
Information: For definitions and information concerning LOGICDATA
Control boxes please refer to the applicable manual.
2.3 Functionality HSU
The HSU cable-handswitch offers following functionality:
• Big and comfortable to use buttons
• Info display with status information
• Up to 4 memory buttons
• Control of one motor group
• Display of 1/10 inch or cm
• Easy and fast underside mounting (screws are included)
To Next Page
Loading...
