26
TV DISPLAY To select the aspect ratio of the playback picture:
4:3 PANSCAN
If you have a conventional TV and want both
sides of the wide picture to be trimmed or
formatted to t your TV screen.
4:3 LETTERBOX
If you have a normal TV. A wide picture with
black bands on the upper and lower portions
of the TV screen will be displayed.
16:9
Wide screen display.
WIDE SQUEEZE
Sets the screen mode to 4:3. A wide picture
will be squeezed to t a 4:3 conventional
display.
ANGLE MARK If this is turned on, the multi-angle logo with the number of
available angles will be displayed when playing a DVD that
oers multiple angles.
OSD LANGUAGE Allows you to select the setup menu and OSD language.
CLOSED
CAPTIONS
For hearing-impaired viewers, the programme can display
recorded explanatory captions.
SCREEN SAVER • Select ON to display the screen saver. A moving DVD
logo appears on a dark screen to prevent screen burn
when disc playback is stopped, paused, or you have not
used the DVD player or its remote control for more than 5
minutes when the power is still on.
• Select OFF to turn o the screen saver function.
LAST MEMORY • Select ON/OFF for last memory settings on DVD playback.
• When ON is selected, the unit will resume the last stopped
playback:
The last memory will be clear when
• You press the
STOP button twice, or
• You have replaced another DVD into the unit.
AUTO STANDBY • Select 3 HOURS or 4 HOURS to set the idle length.
While idling, a pop up warning window will
display for 10 seconds before the unit turns
itself o. Press any button to extend the time.
• Select OFF to turn o the auto standby function.
4. Press the SETUP button to exit the menu.
L12SPDVD17_IB_Final171006V3.indd 26 9/10/2017 5:41 PM
To Next Page
Loading...
Need help?
General
