Logik L12SPDVD17 User Manual

27
Customising the Audio Settings
1. Press the SETUP button to display the
setup menu.
2. Press the buttons to select AUDIO
SETUP PAGE.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
FULL
OFF
-
-
LT/RT
STEREO
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
STR
L-MONO
R-MONO
MIX-MONO
DUAL MONO STR
DYNAMIC
- - AUDIO SETUP PAGE - -
DOWNMIX
DOLBY DIGITAL
STR
GOTO AUDIO SETUP PAGE
3. Press the buttons to select the following options and then press the buttons to
change the setting. Press button on the unit or the remote control to conrm.
DOWNMIX Allows you to set the stereo analogue output of your DVD
player.
• LT/RT
Select this option if your DVD player is connected to a
Dolby decoder.
• STEREO
Select this option to change channel output to stereo
which delivers sound from only the two front speakers.
DOLBY DIGITAL • DUAL MONO
If your amplier / decoder has Dolby Digital output,
you may select STEREO, L – MONO, R – MONO, or MIX
MONO mode for your amplier decoder.
• DYNAMIC
Dynamic range compression.
4. Press the SETUP button to exit the menu.
L12SPDVD17_IB_Final171006V3.indd 27 9/10/2017 5:41 PM

Logik L12SPDVD17 Specifications

General

Brand	Logik
Model	L12SPDVD17
Category	Portable DVD Player
Language	English