33
Problem Solution
The disc does not
play.
• There is no disc inside the unit (“NO DISC” appears on the
display).
• Insert the disc correctly with the graphics facing up.
• Clean the disc.
• A non-valid disc has been inserted, or the disc region number
does not match the region number of the unit.
• Condensation may have formed inside the unit due to a sudden
change in temperature. Wait about an hour for it to clear and try
again.
• It may not be possible to play CD-R/RW or DVD-R/RW in all cases
due to the type of disc or condition of the recording. If you are
having trouble playing a certain disc, remove the disc and try a
dierent one. Improperly formatted discs will not play on this
DVD player.
No key operation
(via the DVD Player
and/or the remote
control) is eective.
• Turn the unit o and then back to on. Alternatively, turn o the
unit, disconnect the mains adapter and then re-connect it. (The
DVD player may not be operating properly due to lightning,
static electricity or some other external factor.)
The unit switches
o when it has
been idle for a few
minutes
• If there is no-activity after 20 minutes, the unit will automatically
enter standby mode. Press the button on the unit or the remote
control to switch on the unit.
If any anomaly is encountered, turn o the unit by switching the ON/OFF switch
to OFF position and turn it on again.
L12SPDVD17_IB_Final171006V3.indd 33 9/10/2017 5:41 PM
To Next Page
Loading...
Need help?
General
