Logik L19LDVB19 User Manual

GB-15
PreparationConnectionsInitial SetupUsing the FeaturesUsing the DVD FeaturesHints and Tips, Specification
and Safety Warnings
Selecting the Input Source
Press the 1. FUNCTION button to display the input source list.
Press the 2.
buttons to select the input source that you want:
DTV, TV, AV1, AV2/SCART, YUV/SCART, DVD or HDMI.
Press the 3. ENTER/OK button to confirm your selection.
Alternative
Press the • TV/DTV button to switch the input source between TV and
DTV.
Press the • DVD button to switch the input source to DVD directly.
Press the • AV button to switch the input source among AV1, AV2/SCART,
YUV/SCART or HDMI.
Press the • RADIO button to switch to digital radio channels directly.
Channel Selection
Press the • CH / CH buttons on the top panel of the TV or the
CH/PAGE
/ buttons repeatedly or 0-9 buttons on the remote control
to select the channel.
Alternative
Press the • LIST button to enter the Channel List. Then use the
buttons to highlight and select the channel. Press the ENTER/OK button
to confirm the setting.
Press the • LAST CH button on the remote control to return to the
previously viewed channel.
Press the • FAV button to view the Favourite List. Then use the
buttons
to highlight and select the channel. Press the ENTER/OK button to confirm
the setting.
Press the • LAST CH button to return to the previously viewed channel.
Volume Adjustment
Press the • VOL + or – buttons on the top panel of the TV or on the remote control to adjust the volume.
If you wish to switch the sound off, press the •
button.
You can cancel this function by pressing the
or VOL + buttons.
DTV
TV
AV1
AV2/SCART
YUV/SCART
DVD
HDMI

Logik L19LDVB19 Specifications

General

Brand	Logik
Model	L19LDVB19
Category	LCD TV
Language	English