Logik L19LDVB19 User Manual

GB-19
PreparationConnectionsInitial SetupUsing the FeaturesUsing the DVD FeaturesHints and Tips, Specification
and Safety Warnings
A CI Information Main menu will pop up. Press the 3. buttons to display
the Module Information, Smart Card Information, Language, Software
Download.
Press the 4. TV MENU button to return back to the previous menu.
Press the 5. EXIT button to exit the menu.
CI (Common Interface) (DTV Mode)
The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These
services are provided by TopUp TV and others. The Common Access Module and viewing card can be obtained from the service
provider.
Do not repeatedly insert or remove the Common Access Module as this may damage the interface and cause a
malfunction.
This feature is not available in all countries.
To insert the Common Access Module
Before you insert the Common Access Module, ensure that the 1.
TV is switched off and the viewing card is inserted in accordance
with the Service Provider’s instructions.
Insert the Common Access Module into the slot. Flip the 2.
Common Access Module to another side and try again if you feel
resistance.
Switch the TV on.3.
To remove the Common Access Module
Before you remove the Common Access Module, ensure that the 1.
TV is switched off.
Pull the Common Access Module from the slot.2.
Switch the TV on.3.
To view the module information
Press the 1. TV MENU button and then use the buttons to select the TV
SETTING menu.
Press the 2.
buttons and then the ENTER/OK button or the button to
select CI Information.
EXIT OK
Main menu
Module information
Smart card information
Language
Software Download
Press OK to select, or Exit to quit.
Top View of TV
CI (Common Interface) slot
Allows the Common Access Module to be
inserted with its label facing back and access the
content that has been encrypted.

Logik L19LDVB19 Specifications

General

Brand	Logik
Model	L19LDVB19
Category	LCD TV
Language	English