Logik L19LDVB19 User Manual

GB-20
Preparation Connections Initial Setup Using the Features Using the DVD Features Hints and Tips, Specification
and Safety Warnings
Customising the PICTURE Setting
Allows you to set your preferred picture mode.
Press the 1. TV MENU button and then use the
buttons to select the
PICTURE menu.
Use the 2. buttons to select the following options and the buttons to
adjust the setting.
Picture Mode Cycles among picture mode: Standard / Movie / Dynamic / Soft / Personal.
Alternative
You may press the PICTURE button to select the picture mode directly.
Contrast Adjusts the difference between light and dark levels in the picture. (for Personal mode)
Brightness Increase or decrease the amount of white in the picture. (for Personal mode)
Sharpness Adjusts the level of crispness in the edges between light and dark areas of the picture.
Colour Controls the colour intensity. (for Personal mode)
Tint (For NTSC
format)
Adjusts the balance between red and green levels.
(Tint is only available for NTSC signal reception.)
Colour Temp Adjusts the colour components independently to achieve a warm or cool effect: Normal /
Warm / Cold.
Normal• : Increase natural tint
Warm• : Increases red tint
Cold• : Increases blue tint
Press the 3. TV MENU button to return to the previous menu.
Press the 4. EXIT button to exit the menu.

Logik L19LDVB19 Specifications

General

Brand	Logik
Model	L19LDVB19
Category	LCD TV
Language	English