Copyright © Lojer Oy, 2012 11
09/2012 Rev. 3.0
6 Technical information
Check the information also from the type plate (Figure 11).
Vertical pull
50-80-100kg
6.1 Standards
The device is in conformity with essential requirements of the Directive 93/42/EEC (Medical devices) and the
corresponding Finnish National Law no. 629 (2010). The device is marked with CE marking. The device is classified as
Class I medical device according to the directive.
7 Recycling
Most of the materials used in the device are recyclable. When the device is removed from usage, it should be
dissembled and recycled appropriately. Recycling should be done by specialized company. Do not dispose the device
in the household waste.
Remove the battery from the device. The oil from the hydraulic system should be removed and disposed
appropriately. Gas springs should be unpressurised and oilfree before recycling.
Following materials should be separated before recycling:
METALS: frame, screws, nails, springs etc.
ENERGY WASTE (combustible waste): wood and wood-based materials.
ELECTRIC WASTE: wires, power cords, actuators etc.
HOUSE HOLD WASTE: plastic, upholsteries and other materials which cannot be
separated further.
Contact your local disposal authority for more details of how to recycle. Follow the instructions given in local
collection points.
To Next Page
Loading...