CHAPTER
Ⅰ
SAFETY INFORMATION
13
WARNING LABEL FOR BINDING POSITION
(18)
Label location: it is in front of the frame, rear side of the balancing weight.
Inform users that where the binding position
is in the transportation, to bind this hook in order
to secure the machine in the transporting vehicle.
Figure 4
-
--
-
18
CHECKING QUICK DIS-CONNECT CONNETING LABEL (19)
Label location: it is on the beam of the bucket base.
Make sure to operate the machine strictly
according to the warning label, or it may cause
machine damage or serious personal casualties.
Figure 4
-
--
-
19
CRUSH HAZARD WARNING LABEL (20)
Label location: it is in the front of the frame.
Be not under the lift arm when it is raised,
unless it is supported.
Figure 4
-
--
-
20
To Next Page
Loading...
