CHAPTER III MACHINE OPERATION
45
3.3 THE MAIN TECHNIC DATA OF COMMON USE
3.3.1 ENGINE
3.3.1.1 Cooling water temperature (
℃
)
1
．
Suitable inlet water temperature 45 ~ 60
2
．
Suitable outlet water temperature 60 ~ 90
3
．
The maximum outlet water temperature 95
3.3.1.2 Oil temperature (
℃
)
1
．
The lowest temperature of sump 45
2
．
Optimum temperature of sump 80
3
．
The highest temperature of sump 95
3.3.1.3 Engine oil pressure gauge reading (Mpa)
1
．
Idle speed≥0.1
2
．
Rated engine speed: 0.35
～
0.55
3.3.2 VOLTMETER INDICATION
When the rated voltage of system is 12V and the voltage indicator is within the range 12V ~ 14V,
that means the power supply system is normal. When the pressure is less than 12V or above 14V,
please check the relative system or equipment.
3.4 FUEL,LUBRICANTS,GREASE AND THE COOLING WATER
3.4.1 FUEL AND HYDRAULIC OIL
3.4.1.1 Solemnly Tip:
Be sure to follow the instructions to select oil products of diesel engine oil, diesel, hydraulic oil.
Although the price of counterfeit oil is cheap, but it will invalidate early and lose the function, induced
Skid Steer Loader failed, causing inside damage of the machine, and difficult to work, leaving a huge
security risk, or even result in personal injury or property Loss! (See Table 6)
To Next Page
Loading...