CHAPTER V HOISTINGAND TRANSPORTATION SECUTING
65
5.1 HOISTING AND TRANSPORTATION OF SKID LOADER
5.1.1 When loader needs hoisting, the lifting hook can be used to catch the ear-plate available on
the machine body. Before hoisting, adjust the length of ropes to keep the level of the machine. When
hoisting, keep the lifting hook stable, better with the special tools lest steel ropes hit the machine hood
and the cab. (see the figure 27)
Figure 27 HOISTING SCHEMA OF THE MACHINE
5.1.2 When long-distance transporting of skid loader with flat board or similar flat board,
the loader needs securing by iron chain prevent from shaking and flopping. In order to prevent
the machine from moving forward and backward on the flat board, the front and the back wheels
are fastened by triangle metal and then tie with steel wire tightly.
5.1.3 The transportation of integrated machine should accord with the local regulation of
transportation sector, if there is no special, the loader parts and components are not dismantled
in the process of transportation.
5.1.4 NOTE: It is necessary to check whether the truck or the trailer is safe
enough or not before the loading . Park the trailer or the truck on the ground
To Next Page
Loading...
