CHAPTER III MACHINE OPERATION
43
3.2.8 THROTTLE CONTROL
There are the handle and the foot throttle controls, as shown Figure 19
Figure 19 THROTTLE CONTROL
1. FOOT THROTTLE 2. HANDLE THROTTLE
1. Handle throttle control
Move the Handle throttle control forward to increase the engine speed, move backward to reduce the
engine speed. Usually to use the handle throttle control, the throttle reaches maximum position, the
hydraulic pump in front of engine can provide the maximum hydraulic flow, thereby increasing the driving,
loading and reflecting speed.
2. Foot throttle control
Step on the foot throttle control to increase the engine speed, release the pedal to decrease the
engine speed. Foot throttle control is used for the maximum control of the situation, such as hard
conditions in the flexible controlling requirements. Meanwhile the handle throttle control should be at the
position of the minimum engine speed.
To Next Page
Loading...
