Foreword
Documentation
Operation & Maintenance Manual shall be properly preserved in the cab for review at any time. Read
and comprehend this manual by all means.
This manual may not incorporate contents generated due to continuous product improvement and
update.
Some structures or accessories shown on photos or pictures in this manual may be different from
those on your machine.
In case of any doubts about the machine or this manual, please consult the LONKING dealers for the
latest information.
Manual structure
This maintenance manual consists of 7 parts: forward, safety (Chapter I), product information (Chapter
II), operation (Chapter III), maintenance (Chapter I V) , hoisting of loader& loaderfixing in transportation
(Chapter V), common malfunctions and troubleshooting (Chapter VI) and reference table for densities
of common materials.
Safety
This part lists a series of basic safety preventions, various warning labels as well as their respective
content and position applied.
Product information
This part lists the usage, performance and parameters of the product.
Operation
This part describes the instruments, switches, control mechanism of machine and tooling as well as
materials on transportation and towing.
Maintenance
This part specifies the maintenance cycle of all machine parts. The items given in the Table of
Maintenance Cycle shall be done within the specified cycle. The items without the specification for
maintenance cycle shall be listed under the “maintenance when necessary”.
Attached table
Reference Table for Densities of Common Materials
To Next Page
Loading...
Need help?
General
