Lonking CDM816D - Maintenance items to be performed once every 1000 hours or every half a year; Maintenance items to be performed once every 2000 hours or every year; Maintenance items to be performed once every 4000 hours or every two years; Maintenance item to be performed once every 6000 hours or every three years

CDM816D WHEEL LOADER
73
3. Check the seal of the distribution valve and working cylinder, and repair or replace them if
necessary.
4. Check the working condition of torque converter and transmission, repair them if necessary.
IX. Maintenance item to be performed once every 6000 hours or every three years.
1. Check the hydraulic hoses which bearing high oil press and sealing elements and replace them if
necessary.
X. Maintenance item to be performed once 10000 hours or every five years.
1. Check the transmission and drive axles, dismantle and repair them if necessary.
Note:
1. The steering bearings of the front and rear parts of the frame need to be checked after working
5000 hours and replace it if exists any abnormal sound.
2. The seat belt needs to be replaced once three years after the date of manufacture or 6000 hours
after the date of operating (whichever comes first);