18
7. Troubleshooting
Trouble: E-4 appears on the LED display
Cause: The machine is getting too hot. The heating
switches off and the machine cools down.
Solution: Disconnect the machine from the mains supply
for a moment and then re-connect it.
Trouble: E-8 appears on the LED display
Cause: The vaporizer is clogged.
Solution: Please send the machine to the service-station
or your local dealer.
Trouble: E-1 appears on the LED display
Solution: Please send the machine to the service-station
or your local dealer.
8. Specifications
Procedure: Haze generator without compressor
Power requirement: 1500 Watt
Voltage: 120 V/ 60 Hz
Warm up time: approx. 60 seconds
Fluid tank capacity: 2 litre
Internal fan: >6000 l/min.
Airborne noise emitted: >70 dbA
Haze output: adjustable in 99 steps, 1%-steps
Haze density: variable
Haze duration: continuous output
Control: DMX 512
0 - 10 V analog
Timer
Stand alone-Mode
Radio remote (option)
XLR-remote (option)
Temperature control: Microprocessor controlled
Overheating protection: Heat exchange module with thermal cut-out
Dimensions (L x W x H): 18.5 x 9.8 x 9.8 in
Weight without canister: 19.1 lbs
Manufactured for:
Look Solutions - Fog machines made in Germany · Bünteweg 33 · DE - 30989 Gehrden
To Next Page
Loading...
