LORD D4 - Auto Open; Error Codes

18
AUTO OPEN
Afterwashing,thedoorwillopenautomaticallytoachievebetter
dryingeect.
NOTE
Thedishwasherdoormustnotbeblockedwhensettoopen
automatically.
Thiscandisruptdoorlockfunctionality.
Therapidandsoakprogramdon’thavetheAutoopenfunction.
ERROR CODES
Ifthereisamalfunction,thedishwasherwilldisplayerrorcodestoidentifythese:
Codes Meanings Possible Causes
E1 Longerinlettime.
Faucetsisnotopened,orwaterintakeis
restricted,orwaterpressureistoolow.
E3
Notreachingrequired
temperature.
Malfunctionofheatingelement.
E4 Overow. Someelementofdishwasherleaks.
E8
Failureoforientationof
distributaryvalve.
Opencircuitorbreakofdistributary
valve.
Ec Washingcontrolsystemfail. PCBormotorfail.
Ed
Failureofcommunication
betweenmainPCBwith
displaypcb.
Opencircuitorbreakwiringforthe
communication.

WARNING
• Ifoverowoccurs,turnothemainwatersupplybeforecallingaservice.
• Ifthereiswaterinthebasepanbecauseofanoverllorsmallleak,thewatershould
beremovedbeforerestartingthedishwasher.