5
4. Under DDNS Select, click the drop-down menu and select http://lorexddns.net
5. In the corresponding text fields, enter your DDNS username and password.
NOTE: Obtain this information from the confirmation email after registering for the free Lorex
DDNS service.
6. Under DDNS Domain Name, enter only the first portion of your DDNS domain from the
confirmation email. For example, if your domain name is tomsmith@lorexddns.net, you only
need to enter
tomsmith
in the text field.
7. Click Submit to save your settings or click Cancel to exit without saving.
8. You must reset your DVR in order for the changes to take effect. Disconnect and reconnect
the power cable from the rear panel to reset.
NOTE: Please allow 10~15 minutes for the DDNS servers to update with your new URL. This is
normal for a DDNS system.
Now that you have configured your DDNS settings, you should be able to log in to your system
from a remote PC (i.e. a PC not on your local network).
NOTE: The PC used for remote viewing requires Internet Explorer 6 or later and QuickTime.
QuickTime must be configured to the necessary settings.
Figure 25.3 DDNS setup in DVR Netviewer
ATTENTION: You MUST
enter your DDNS
information LOCALLY
before attempting
remote access.
To Next Page
Loading...
Need help?
General