146
Configuring the system remotely
Information Menu
To view your DVR’s system information:
1 Cl
ick REMOTE Config>System>Information.
2 The f
ollowing system information is shown:
• Device Name, Firmware, MAC Version, IP Address, System MAC address, DDNS Name, HDD
(Har
d drive capacity), Video type, Net Client Port, Web Port, and Mobile Port.
Changing save directories
You can change where the backup file and screen captures are stored on the local hard
drive.
To change the save directories:
1 Click the LO
CAL CONFIG tab.
2 Cl
ick the open button beside the appropriate fields:
• Rec
ord: Recorded video files are stored here.
• Snapshot: Screen captures are stored here.
• Backup: Backed up video files are stored here.
3 Sel
ect the desired directory, and click Open.
4 Cl
ick Save to apply your changes.
To Next Page
Loading...
