Lorex VANTAGE LH110 ECO SERIES - Page 159

145
Configuring the system remotely
4 Select the checkboxes to enable the menus the user will have access to.
5 Cl
ick Save to apply your settings.
To change the Admin Password:
1 Cl
ick REMOTE Config>System>User.
2 Se
lect admin in the user list.
3 In the
Pws Enable drop-down menu, select Enable.
4 In the
Password and Confirm fields, enter the new password.
5 Cl
ick Save apply the settings.
DST Menu
To configure the DST (daylight saving time) menu:
1 Click RE
MOTE Config>System>DST.
2 Co
nfigure the following:
• DST: Select Enable or Disable to enable or disable DST on the system.
• Time
Offset: Enter the number of hours DST should offset.
• DST Mode: Select the desired DST mode.
• Start Time: Select when DST begins.
• End Time: Select when DST ends.
3 Cl
ick Save to apply your changes.
Select the menus that the users will
have access to