Do you have a question about the Lowrance Elite-7x and is the answer not in the manual?
Display Size | 7 inches |
---|---|
Display Resolution | 800 x 480 pixels |
GPS | Yes |
DownScan Imaging | Yes |
Chartplotting | Yes |
Waterproof Rating | IPX7 |
Transducer | Included |
Display Type | TFT LCD |
Sonar Frequency | 83/200 kHz |
Sonar Power | 500W (RMS), 4000W (Peak to Peak) |
Maximum Depth | 1000 ft (305 m) |
Voltage | 12V |
Sonar Type | DownScan |
Depth Capability | 1000 ft (305 m) |
Lists measures to correct radio or television interference.
Explains the function of buttons like LIGHT/POWER, KEYPAD, PAGES, MENU, ENTER, ZOOM.
Describes the unit's support for two types of sonar: Conventional and Downscan.
Guides the user through initial unit setup.
Explains how to select and navigate between different display pages.
Describes how to navigate to the main system settings menu.
Explains how to use keypad and ENTER to select menu options.
Covers menu interaction methods like scrollbars, on/off features, and dropdowns.
Explains how fishing modes enhance performance with preset sonar settings.
Explains features enabled when Advanced Mode is turned on.
Details how to reset unit options and settings to factory defaults.
Guides on adjusting panel size and arrangement of combo pages.
Allows review of recent sonar history by moving the cursor left.
Controls the level of detail shown on the display for echo clarity.
Adjusts settings for both Conventional and Downscan sonar modes.
Restricts digital depth capability for smoother scrolling within a selected range.
Adjusts depth readings to account for transducer-to-keel distance.
Details features specific to Downscan Imaging (DSI) sonar.
Directs users to the Settings menu for overall unit configuration.
Adjusts unit settings like language, mute audio, and advanced mode.
Enables alarms and sets thresholds for events like shallow water or fish detection.
Details general physical, display, and communication specs.
Lists max depth, transducer frequency, and transducer cable specs.
Covers transmit power, voltage input, current drain, and fuse type.