Need help?Do you have a question about the Lowrance GlobalNav 200 and is the answer not in the manual?
Initial steps to acquire a GPS fix and position data.
Methods for acquiring satellite data, including cold start and manual initialization.
Customizing plotter display settings like orientation and grid lines.
Methods for saving current and cursor positions as waypoints.
Changing waypoint coordinates (Lat/Lon) and assigning names.
Adding waypoints sequentially to form a navigable route.
Navigating a pre-defined route, including forward and reverse options.
Deleting specific routes from the device's memory.
Initiating navigation to saved waypoints or cursor locations.
Stopping an active navigation session or route guidance.
Procedures for cold start and manual GPS initialization.
Setting up device alarms and configuring on-screen messages.
To Next Page
General