Lowrance HOOK-9 - Advanced Mode; Standby Mode; Restore Defaults

12
13
Basic Operation | HOOK series
Basic Operation | HOOK series
Press the PWR/LIGHT key to access the Backlight
dialog.
Restore defaults
Resets unit options and settings
to defaults.
NOTE: Leaving your unit in Standby
mode when your boat is not in use will
run down your battery.
Advanced mode
Enables advanced features and settings.
The following features are enabled when Ad-
vanced mode is turned on:
• Navigation (Enables arrival radius, off-
course distance and Bearings setting)
• Alarms (Enables arrival, off course and
anchor alarm options)
• NMEA 0183 Output (Requires optional
Power/NMEA cable 000-0127-49)
• Units (Enables distance, speed, depth,
temperature, and bearings options)
Standby mode
Lowers power consumption by
turning o sonar and the display.