Lowrance LGC-3000 User Manual (English)

To Next Page

Pub. 988-0154-651

LGC-3000, LGC-Baja

GPS Modules

Installation Instructions

This instruction sheet tells how to install your LGC-3000 or LGC-Baja

GPS module and connect it to a NMEA 2000

network using

LowranceNET™ network components.

The LGC-Baja is a ruggedized module designed to withstand the rigors of off-

road automobile racing. It works just like the LGC-3000, and for simplicity

we will only refer to the LGC-3000 in the rest of this instruction sheet.

The LGC-3000 GPS module, like the other Lowrance Electronic Probe

(EP) sensors, is designed only for use with a NMEA 2000 Network. It

MUST be connected to a NMEA 2000 network or it WILL NOT function.

CAUTION:

Installing LowranceNET NMEA 2000 devices is significantly

different from installing earlier Lowrance components without

NMEA 2000 features. You should read all of the installation in-

structions before proceeding. You should decide where to install

all components before drilling any holes in your vessel or vehicle.

Some sonar or GPS display units may require: 1. a software upgrade to

display NMEA 2000 data correctly; and 2. a manual addendum describ-

ing how to operate the sensor. You can download these free and get ad-

ditional information on the NMEA 2000

compatible LowranceNET™

system at our web site, www.lowrance.com.

All Lowrance NMEA 2000 capable devices are either NMEA 2000 certi-

fied or certification is pending. See our web site for the latest product

status information.

LGC-3000 Module, bottom view (left) and top view (right).

™

Need help?

Do you have a question about the Lowrance LGC-3000 and is the answer not in the manual?

Lowrance LGC-3000 Specifications

General

Type	GPS Receiver
Update Rate	10 Hz
Power Supply	12 VDC
SBAS Support	Yes
Mounting	Pole or Surface Mount
Connector	NMEA 0183
Accuracy	<3 meters
Position Accuracy (with WAAS/EGNOS/MSAS)	<3 meters
Antenna	Built-in
Operating Temperature	-15°C to 70°C
Compatibility	Lowrance
Waterproof	Yes