Need help?Do you have a question about the LRAD 500X and is the answer not in the manual?
Details the interface connections on the LRAD-500X unit's rear panel.
Describes the DC power output connector and its designation.
The main power on/off switch for the unit.
Provides over-current protection for the system.
Alters the directivity or 'beam width' of the unit's acoustic output.
Controls the gain of the system and provides a continuous range of output levels.
Boosts the level of spoken voice communications for greater range and intelligibility.
Indicates Power, Clipping, and Fault status to the operator.
Connects MP3 player and microphone devices to the LRAD-500X.
Details mounting options and structural points for the LRAD-500X.
Diagram and explanation of safe operating distances and zones.
Warning to clear personnel from the 75-meter zone before activating high volume.
Information on provided hearing protection for operators and nearby personnel.
Warning to set volume to minimum before powering up the unit.
Check Power and Fault LEDs after powering on the unit.
Steps for playing audio files from the MP3 player.
Instructions for operating the MP3 player's tone generator function.
Requirement for hearing protection during LRAD-500X operation.
Guidelines for positioning and aiming to protect nearby personnel.
Diagnosing and replacing a failed transducer.
Symptoms and identification of a faulty amplifier.
List of available spare parts for the LRAD-500X.
List of parts for LRAD-500X repairs.
Technical details including weight, dimensions, SPL, and power consumption.
Environmental specifications and test methods.
General| Type | Long Range Acoustic Device |
|---|---|
| Weight | 45 lbs (20.4 kg) |
| Beam Width | 30 degrees |
| Coverage Angle | 30 degrees |
| Operating Temperature | -20°C to +55°C |
To Next Page