To Next Page

To Previous Page

Setting up

CG-6 Operation Manual p/n 115370001 Rev A

3—9

To enter the day, move the cursor to Day and press the Enter button. The following

screen will appear:

Figure 3-13 The day editing screen

Move the cursor to the chosen field character and press the Enter button. To clear the

entire field, move the cursor to the CLEAR field and press the Enter button. To clear the

last character that was entered, move the cursor to the Backspace field and press the

Enter button. Once you are satisfied with the value, move the cursor to the ACCEPT

field and press the Enter button. To exit this screen, move the cursor to CANCEL and

press the Enter button.

You will be returned to the system time editing screen.

To enter the hour, move the cursor to Hour and press the Enter button. The following