LRS SCINTREX AUTOGRAV CG-6 User Manual

Setting up
CG-6 Operation Manual p/n 115370001 Rev A
3—10
You will be returned to the system time editing screen.
To enter the minutes, move the cursor to Minute and press the Enter button. The
following screen will appear:
Figure 3-15 The minute editing screen
Move the cursor to the chosen field character and press the Enter button. To clear the
entire field, move the cursor to the CLEAR field and press the Enter button. To clear the
last character that was entered, move the cursor to the Backspace field and press the
Enter button. Once you are satisfied with the value, move the cursor to the ACCEPT
field and press the Enter button. To exit this screen, move the cursor to CANCEL and
press the Enter button.
You will be returned to the system time editing screen.
To enter the seconds, move the cursor to Second and press the Enter button. The
following screen will appear:
Figure 3-16 The seconds editing screen
Move the cursor to the chosen field character and press the Enter button. To clear the
entire field, move the cursor to the CLEAR field and press the Enter button. To clear the
last character that was entered, move the cursor to the Backspace field and press the
Enter button. Once you are satisfied with the value, move the cursor to the ACCEPT

LRS SCINTREX AUTOGRAV CG-6 Specifications

General

Brand	LRS
Model	SCINTREX AUTOGRAV CG-6
Category	Measuring Instruments
Language	English