Setting up
CG-6 Operation Manual p/n 115370001 Rev A
The Survey Name can be any combination of 31 alphanumeric characters. To type the
Survey Name, move the cursor to the chosen character and press the Enter button. To
clear the entire field, move the cursor to the CLEAR field and press the Enter button. To
clear the last character that was entered, move the cursor to the Backspace field and
press the Enter button. Once you are satisfied with your survey name, move the cursor
to the ACCEPT field and press the Enter button. To exit this screen, move the cursor to
CANCEL and press the Enter button.
Editing or creating the Operator Name
To edit or create the operator name, move the cursor to Operator and press the Enter
button. The following screen will appear:
Figure 3-19 The operator name editing screen
The Operator Name can be any combination of 31 alphanumeric characters. To type the
Operator Name, move the cursor to the chosen character and press the Enter button. To
clear the entire field, move the cursor to the CLEAR field and press the Enter button. To
clear the last character that was entered, move the cursor to the Backspace field and
press the Enter button. Once you are satisfied with your survey name, move the cursor
to the ACCEPT field and press the Enter button. To exit this screen, move the cursor to
CANCEL and press the Enter button.
Entering the number of cycles
To edit the number of cycles at your station, move the cursor to Cycles and press the
Enter button. The following screen will appear:
To Next Page
Loading...
Need help?
General