LRS T7470 - Using the Star Pager

Using the Star Pager
Charging
Any rechargeable pager will require use of an LRS charger.
1. Place the pager in the charger.
2. Allow unit to fully charge overnight.
3. Remove from charger, and pager will vibrate and light all lights as a verification that it is working.
4. Replace the pager in the charger at the end of each day.
• Star Pagers uses the charger 9 (CH-R9)
Programming
To program the pager see pg. 28
Using the SP5 1-Line Rechargeable Alphanumeric Pager
Charging
The SP5 uses the Charger 5 (CH-R5)
1. Place the pager in the charger.
2. Allow unit to fully charge overnight.
3. Remove from charger, pager will vibrate or beep to show it is working.
4. LCD will show the pager’s ID.
5. Replace the pager in the charger at the end of each day.
Menus
To access the vibe/contrast menu, remove the pager from the charger. While vibrating or beeping, press and
hold the Select button for 8 seconds. This top-level menu will display:
1
2
3
4
1
4
LR S U S . COM
Long Range Systems 36 T7470 User Manual