Basic Paging Operation Guide
The following are the most commonly used procedures for paging. Make sure that all rechargeable guest or
staff pagers are not on the charging unit and all battery-operated pagers are turned on.
Page Guest Pagers:
Non-Alphanumeric (AdverTeaser, Pizza, Lobster, Coaster Call pagers)
1. Main screen displays – Guest #: - - - -
2. Enter number assigned to guest at handout.
3. Press ENTER to send page.
4. Return guest pagers to charging unit after paging.
Alphanumeric (Alphanumeric Coaster pager)
1. Main screen displays – Guest #: - - - -
2. Enter number assigned to guest at handout - then press ENTER.
3. Enter message code (000-099). (see Canned Messages Table pg. 8).
4. Press ENTER to send page.
5. Return guest pagers to charging unit after paging.
Page Individual Staff Pagers:
Non-Alphanumeric (Star Pager)
1. On keypad press STAFF (Display will show: Pager #: - - - -).
2. Enter staff pager number to be paged - then press ENTER.
3. Press ENTER to send page.
OR
4. Press F1 (V1), F2 (V2) or F3 (V3) for 1, 2 or 3 vibrations.
Alphanumeric (Alphanumeric, Rechargeable alphanumeric pagers)
1. On keypad press STAFF (Display will show: Pager #: - - - -).
2. Enter staff pager number to be paged - then press ENTER.
3. Enter message code (000-099). (see Canned Messages Table pg. 8)
4. Press ENTER to send page.
OR
5. Press F1 (V1), F2 (V2) or F3 (V3) for 1, 2 or 3 vibrations.
All Call Page:
Page all guest pagers simultaneously.
At (Guest #: - - -) Screen Display:
1. Enter 000 then press ENTER.
Long Range Systems 6 T7470 User Manual
To Next Page
Loading...
Need help?
General
