Long Range Systems 7 T7470 User Manual
All Staff Alpha Page:
Page all staff pagers simultaneously.
1. Press STAFF.
2. Press 9-1-1 then ENTER.
3. Enter message number code (000-099). (see Canned Messages Table pg. 8).
4. Press ENTER to send page.
OR
5
. Choose F1 (V1), F2 (V2), F3 (V3) or F4 (Exit) for 1, 2 or 3 vibrations.
All Staff SP4 Page:
1. Press STAFF.
2. Type 0-0-0 then ENTER.
3. Press F1 (YES) to send all page, or F4 (NO) to cancel.
4. Enter a message of 1-9.
5. Press ENTER to send the page.
OR
6. Choose F1 (V1), F2 (V2), F3 (V3) or F4 (Exit) to send 1, 2 or 3 vibrations.
Page a Cell Phone
1. Press Cell Phone and type in guest’s cell phone number, then press ENTER.
2. Record the Pager number that appears on the screen.
Note: Pager number 500 – 999 are reserved for Cell Phone Paging.
3. When the customer’s table is ready, at the Guest Screen, enter the pager number assigned to the
customer.
Canned or Special Alphanumeric Messages
Using Message Codes
When prompted for a message on the T7470 Transmitter (T7470):
1. Enter message number code (and an extension number – optional).
2. Press ENTER.
Example: Send a message to call extension 123.
• From Canned Message Table choose – 006 (Call Ext).
• Enter code 0-0-6-1-2-3 (Displays: CALL EXT 123).
Note: These non-editable messages are built into the transmitter. If using Alphanumeric pagers, ad-
ditional messages can be created (see Create Additional Alphanumeric Messages on pg. 16).
See next page for table of canned messages.
006 MESSAGE
EXTENSION #
To Next Page
Loading...
Need help?
General
