Chapter 1. General
1 - 3
(9) Battery-less
- With the EEPROM, the user program and parameter can be saved permanently without the battery.
(10) Debugging function
On-line debugging is available if the PLC Operation mode is set to debug mode.
y Executed by one command
y Executed by break-point settings
y Executed by the condition of the device
y Executed by the specified scan time
(11) Various program execution function
- Time driven interrupt, external and internal interrupt programs as well as scan programs can be executed by setting the execution condition.
This allows the user to set various program execution modes.
To Next Page
Loading...
