Chapter 6. Input and Output Specifications
6-6
6.2.2 Expansion module
1) Specifications
Expansion Module
Model
Specification
G7E-DR10A G7E-DC08A G7E-DR20A G7E-DR08A
Number of input points 6 points 8 points 12 points 4 point
Insulation method Photo coupler
Rated input voltage DC 24V
Rated input current 7 mA
Operating voltage range DC 20.4 ~ 28.8V (ripple: less than 5%)
Max. Simultaneous input points 100% simultaneously On
On voltage / On current DC19V or higher/ 5.7 mA or higher
Off voltage / Off current DC6V or lower / 1.8 mA or lower
Input impedance Approx. 3.3 kΩ
Off → On 0,1,2,5,10,20,50,100,200,500,1000ms (Default : 10ms)
Response time
On → Off 0,1,2,5,10,20,50,100,200,500,1000ms (Default : 10ms)
Common terminal 6 points / com 4 points / com 12 points / com 4 points / com
Operating indicator LED turns on at ON state of input
2) Circuit diagram
It’s the same with the one for the main unit.
3) Input wiring
DC24V
DC24V
To Next Page
Loading...
