Chapter 8. Communication Functions
8-40
(2)
Entry List settings
• Select ‘Dedicated’ -> ‘LG Inverter’ -> ‘List…’, and then the following window will be displayed.
• Select the items, and then the following window will be displayed..
• Station No. is for slave inverter station’s number. Stations No. 0 to 31 is available.
• Select ‘Send’ to write data to an inverter.
• Select ‘Receive’ to read data from inverter.
• Size is the data size to send and receive, and 1 to 8 words are available.
• PLC area and LG INVERTER area can be set in Area.
• M, I, Q areas (unit: word) can be used for PLC area.
• Input the inverter’s address in the LG INVERTER Area. H0000 to Hffff is available.
• Download the communication parameter after settings.
To Next Page
Loading...
