LS tractor MT342 - Clutch Engaging Speed Adjustment Knob (MPC models only)

3 -49
(14) Clutch engaging speed
adjustment knob (MPC models
only)
 This knob is used to adjust the engaging time of
the main clutch actuated by a power clutch valve.
 This is only for mechanical transmission models
with power clutch system. (MPC)
 You can adjust the engaging speed
appropriately depending on your working
conditions.
 If turning the knob with a “-” screw driver or
other suitable tools;
- clockwise : for slower engaging speed
- counter-clockwise : for faster engaging speed.
Notice
▶ When handling the knob, do not over-tighten the knob. It may cause damage or a
failure of the connecting parts of the adjustment linkage.
Faster Slower
Clutch engaging speed
adjustment knob