EasyManua.ls Logo

LS tractor MT342 - Replacing Air Cleaner Element (Dry type); Replacing Cabin Air Filters

LS tractor MT342
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 -41
The filters are made of specially treated media with a rubber sealing strip bonded
around the sides. Take care not to damage the element during installation.
Notice
Cabin
air filters
Knobs
Filter
cover
(3) Replacing Cabin air filters
Before servicing the filters, switch off the blower
and close all the cabin doors and windows.
Cabin air filters are installed on the left and right-
hand side under the cabin roof.
Unscrew the knobs under the roof and remove
the covers and filter elements as shown in the
right figure.
Clean both filter chambers with a damp, lint-free
cloth.
Replace the cabin air filters with a new one.
Re-install the filter covers and tighten the knobs.
(2) Replacing Air cleaner element
(Dry type)
Remove the cover and pull the primary element
straight out, ensuring the safety filter element
remains in place.
Clean the inside of the air cleaner housing using
a clean damp cloth, being careful not to damage
the safety element.
Check if there is damage inside the filter element
by using a light. If finding tiny cracks or small
holes in the filter element or the gasket is
damaged, change it with a new one.
Insert the filter element deeply into the filter housing.
Remove the dust of the evacuator valve and clean the inside of the cover.
Assemble the cover with the evacuator valve facing downwards.
Do not start the engine or close the hood if the filter element is not assembled..
Notice
Primary
element
Evacuator valve
Safety filter
element

Table of Contents

Related product manuals