LS tractor MT342 User Manual

5 -59
1
3
2
③ Side light/Front turn signal light
bulb replacement - Cabin models
1. Remove the screw① retaining the turn signal
light lens and remove the lens.
2. Push in on the turn signal light bulb② and
rotate counterclockwise in the socket to remove
the old bulb.
3. Insert the new bulb into the socket and turn the
bulb in a clockwise direction until tightened.
4. If the side light bulb is damaged, open an
electrode terminal and pull out the bulb, and
replace it with a new one.
5. Install lenses and retaining screw①.
NOTE: For about bulb specification, refer to the
chapter 5-6-(4) in this manual.
② Front turn signal light bulb
replacement – Roll-bar models
1. Remove the two screws① retaining the turn
signal light lens and remove the lens.
2. Push in on the turn signal light bulb② and
rotate bulb counter-clockwise in the socket to
remove the old bulb.
3. Insert the new bulb into the socket and turn it
clockwise until the bulb locks into place.
4. Install lenses and retaining screws.
NOTE: For about bulb specification, refer to the
chapter 5-6-(4) in this manual.
1
2

LS tractor MT342 Specifications

General

Brand	LS tractor
Model	MT342
Category	Tractor
Language	English