7 -4
MT342 MT347 MT352 MT357
PTO
Type Independent PTO with wet disk clutch
No. of speed 1 speed gears / 1 speed gears with neutral (optional)
PTO / Engine 1
st
speed : 540 rpm / 2409 rpm
HYDRAULIC LIFT
3 Point linkage CAT.2
Draft load detection Upper link (optional)
Lowering speed
control and cylinder
fixing device
Down speed control valve
Pump Gear pump type, Engine drive
Rated flow 30.9LPM (8.1GPM)
System pressure 17.0MPa (2466psi)
Lift
capacity
Lower link
end
1250 kgf (2756 lbf)
24” behind
lift point
1120 kgf (2469 lbf)
REMOTE
CONTROL
Type Double acting (Spring return type / Detent type(optional))
No. of Q/coupler 4EA (optional : 6EA)
F/Loader coupler Joystick loader valve with optional extension valve
STEERING SYSTEM
Type Hydrostatic
Oil Transmission oil
Min. turning radius
(without / with brake)
3130mm (10.3 ft) / 2840mm (9.3 ft)
Max. steering angle
54°
No. of steering turns 3.4 turns (lock to lock)
Oil flow
15.6LPM (4.1GPM)(MEC)
20.8LPM (5.5GPM)(C-HST)
26.0LPM (6.9GPM)(S-HST)
15.6LPM (4.1GPM)(MEC)
23.4LPM (6.2GPM)(C-HST)
26.0LPM (6.9GPM)(S-HST)
System pressure 15.2MPa (2205 psi) 15.2MPa (2205 psi)