5 -30
(1) Lubricating grease nipple
Steering cylinder pins (LH/RH)
Front axle holder & Steering arm (LH/RH)
3-point linkage
5-7. Every 50 hour check
Grease nipple
Grease nipple
Grease nipple
(2) Cleaning of Radiator and Radiator screen
See chapter 5-6-(7) in this manual (See page 5-25).
1.Wipe dirt from fittings before greasing.
2.Use a grease gun containing clean high grade of
grease.
For grease specification, see chapter 5-3,
“Lubricants and Capacity” or the last page in this
manual.
3.Pump fresh grease into fitting to adequately
lubricate the component and force out any
contamination from the grease passage.
4.Wipe off excess grease.
To Next Page
Loading...
