3 -9
Key switch
OFF
Start
ON/Preheat
(2) Key switch
OFF - power off (engine stop)
ON/Preheat - power on & automatic glow
Start - engine start
As soon as the engine starts, turn the ignition
key to ON position immediately. If not, it may
cause damage to the starter motor.
▶ Because a safety switch for start-up has to be engaged, put PTO switch to “OFF”
position, depress the clutch pedal fully, and place the F/R shuttle lever in neutral
position, and then turn the key switch to “Start” position. See chapter 4-2-(1),
“Engine Start” in this manual.
▶ If the tractor is not in use, the ignition key should be removed.
Caution
To Next Page
Loading...
