LS LL2300 - Loader Specifications

10
LOADER SPECIFICATION
* Specifications shown are based on ASAE Standards.
* Specifications and design are subject to change without prior notice.
Loader model :
Tractor model :
Bucket leveling :
Loader ratio
0.97:1
A.
Maximum lift height
2,144
mm
84.4
"
B.
Clearance with attachment level
1,942
mm
76.5
"
C.
Clearance with attachment dumped
1,500
mm
59.1
"
D.
Reach at maximum height
453
mm
17.8
"
E.
Maximum dump angle
55
°
55
°
F.
Reach with attachment on ground
1,505
mm
59.3
"
G.
Attachment rollback angle
40
°
40
°
H.
Digging depth below grade
115
mm
4.5
“
J.
Overall height in carry position
1,167
mm
45.9
“
L.
Depth of attachment (To back of inner shell)
501
mm
19.7
"
M.
Height of attachment
524
mm
20.6
"
N.
Depth of attachment (To pivot pin)
644
mm
25.4
"
Lift capacity to full height at pivot pins
484
kgf
1,067
lb.
Breakout force at ground level, pivot pins
1,040
kgf
2,293
lb.
Lift cylinder
25x45x375
mm
1.0x1.8x14.8
“
Bucket cylinder
25x40x350
mm
1.0x1.8x13.8
“
1.
Raising time - Ground level to full height
3.4
sec
2.
Lowering time - Full height to ground
2.4
sec
3.
Bucket dumping time - Full rollback to full dump
2.5
sec
4.
Bucket rollback time - Full dump to full rollback
1.5
sec
5
Attachment width used for specification
1,380
mm
54.3
“
6.
Bucket capacity(Plat condition)
0.19
㎥
6.7
Ft³
7.
Bucket capacity(Heap condition)
0.23
㎥
8.1
Ft³
8.
Loader total weight
321
kg
708
lb.
9.
Weight of boom assembly
151
kg
333
lb.
10.
Weight of mounting frame
83
kg
181.9
lb.
LL2300
MT225S
Non-self-leveling type