The purpose of this manual is to assist you in
maintaining and operating your loader. Read it
carefully, it furnishes information and instructions
that will help you achieve years of dependable
performance.
Some information may be general in nature due
to unknown and varying conditions.
However, through experience and these
instructions, you should be able to develop
operating procedures suitable to your situation.
"Right" and "Left" as used throughout this manual
are determined by facing the direction the
machine will travel when in use.
The photos, illustrations and data used in this
manual are current at the time of printing, but
due to possible in-line production changes, your
machine may vary slightly in detail. The
manufacturer reserves the right to redesign the
machine as may be necessary without notification.
▶ Important:
Illustrations used in this manual may not show all
safety equipment that is recommended to ensure
safe operation of tractor and loader. Refer to the
Safety Precautions section of this manual for
information concerning safety. Consult your dealer
for further information.
▶ Warranty registration
The delivery and warranty registration forms must
be filled out and signed to validate your warranty
protection. The items on the form under "I hereby
acknowledge" should be read and understood.
The terms and conditions of the warranty on this
machine is specified in the front of this manual.
▶ Serial number and location
The serial number is important information about
the machine and it may be necessary to know it
before obtaining the correct replacement part. The
serial number plate is located on the LH(Left
hand) inside of front area of boom. The serial
number should be recorded on the Delivery and
Registration form and below for your
reference.
To Next Page
Loading...