LS Susol Series - Page 23

Test
Connected
Disconnected
Test
Connected
Disconnected
Test
Connected
Disconnected
5. Check the draw-out handle properly inserted and then push the lock plate and turn the draw-out handle
clockwise in order to insert the breaker.
6. When the breaker reaches the TEST position, the lock plate automatically projects and the draw-out
handle is locked.
7. Push in the lock plate and turn the draw-out handle again clockwise until the lock plate projects, the
inserting operation is finished. At this time, the draw-out position indicator shows CONNECTED
position.
Disconnected
position
Tested
position
Connected
position
3. Draw-in operation
H. Operation
1
2
3
4
5
6
22