5-5. When the warning indicator lights
(1) Drain water from Fuel filter
1. Loosen the drain plug and drain water inside of
the filter. (Approx. 150cc(9.1 in³))
2. Tighten the drain plug and bleed the air from the
fuel filter. (See page 5-22)
Drain plug
Body
Element
O-ring
be stopped automatically to protect the PTO
clutch.
At this time, turn the PTO switch “OFF”, and turn
it “ON” again to restart the PTO.
If the PTO system pressure is normal, the PTO
shall rotate continuously if not, the PTO shaft
shall be stopped again after 5~6 seconds later.
In this case, you have to contact your authorized
dealer to check the hydraulic PTO system.
ON : PUSH AND TURN
OFF : PUSH
To Next Page
Loading...
