EasyManua.ls Logo

LS U5010 - Replacing Hydraulic Filter; Replacing Fuel Filter Cartridge

LS U5010
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(2) Replacing Hydraulic filter
If hydraulic filter is clogged, hydraulic system
does not work. When changing the transmission
oil, change the hydraulic filter together.
Hydraulic filter
Warning
When checking or repairing the hydraulic system, the high pressurized oil may
cause serious injury.
-
When repairing, adjusting or removing the hydraulic system, the engine must be
-
When repairing, adjusting or removing the hydraulic system, the engine must be
stopped.
- When finding the leakage or repairing, wear protection equipment for the eyes
and hands.
- If the oil penetrates the skin, go to see a doctor quickly.
(3) Replacing Fuel filter cartridge
1. Loosen the drain plug and drain the fuel inside
of the filter.
2. Disconnect electric wire of the fuel filter sensor.
3. Remove the element from the body
4. Remove the fuel filter sensor from the element
and assemble it to the new element.
5. Attach the element to the body.
Drain plug
Body
Element
5
5 5
5 - 16
6. Connect electric wire of the fuel filter sensor.
7. Tighten the drain plug and bleed the air from the
fuel filter. (See page 5-22)
Body
O-ring
Fuel filter sensor
Do not fill the new element with fuel.
It may cause damage of element as the invisible filthy material enters into the
injection pump.
Warning

Table of Contents

Related product manuals